This article provides information regarding the Microsoft Windows Repair Disk designed to address issues arising from the installation of security updates KB2823324 and KB2782476. Specifically, this repair disk is intended for users who encounter difficulties restarting their systems after applying update KB2823324. If you are experiencing a normal system restart after the update, this repair disk is not necessary.
Purpose of the Microsoft Windows Repair Disk
The Microsoft Windows Repair Disk for KB2823324 and KB2782476 is a bootable image, typically in ISO format, that allows users to start their computer and remove the problematic security update KB2823324. This is a recovery tool specifically designed for situations where the update prevents the system from booting properly. It’s crucial to understand that this is a recovery tool, not a general-purpose troubleshooting disk. Its primary function is to uninstall the specific security update causing the boot issue.
When to Use This Repair Disk
The Microsoft Windows Repair Disk for KB2823324 and KB2782476 should only be used if your system fails to restart successfully after applying security update KB2823324. This typically manifests as the computer being stuck in a boot loop, displaying error messages, or simply failing to load the operating system.
If your system restarts normally after applying the update, you do not need this repair disk. Instead, refer to Microsoft Knowledge Base Article 2839011 for instructions on how to uninstall security update KB2823324 through standard Windows procedures. Using this repair disk unnecessarily could potentially cause unforeseen issues.
How the Repair Disk Works
The repair disk functions by booting the computer into a recovery environment. This environment operates independently of the installed operating system, allowing it to bypass any issues caused by the faulty update. Once booted, the repair disk automatically identifies and uninstalls security update KB2823324. After the update is removed, the system should be able to restart normally.
Creating the Repair Disk
The repair disk is distributed as an ISO image. An ISO image is a single file containing a complete representation of a CD or DVD. To use the repair disk, you need to "burn" or write this ISO image to a bootable media, such as a DVD or USB drive.
Burning the ISO Image to a DVD:
- Download the ISO Image: (Download link provided below)
- Insert a Blank DVD: Place a blank, recordable DVD into your DVD burner drive.
- Use ISO Burning Software: Utilize a DVD burning program that supports ISO image burning. Popular options include:
- Windows Disc Image Burner (built into Windows 7 and later)
- ImgBurn (free and open-source)
- Nero Burning ROM (commercial)
- Select "Burn Image": In your burning software, locate the option to burn an image file to a disc. This option may be labeled differently depending on the software you are using (e.g., "Burn ISO Image," "Write Image File to Disc").
- Select the ISO File: Browse to the location where you saved the downloaded ISO image and select it.
- Initiate Burning: Start the burning process. The software will write the contents of the ISO image to the DVD, creating a bootable repair disk.
- Verify the Burn: After the burning process is complete, verify that the disc was created successfully.
Creating a Bootable USB Drive:
Creating a bootable USB drive from an ISO image requires specialized software. Here’s how to do it using Rufus, a popular and free utility:
- Download Rufus: Download the latest version of Rufus from its official website.
- Connect USB Drive: Connect a USB drive (at least 4GB in size) to your computer. Warning: This process will erase all data on the USB drive. Back up any important files before proceeding.
- Run Rufus: Launch the Rufus application.
- Select Device: In the "Device" dropdown, select the USB drive you connected.
- Boot Selection: In the "Boot selection" dropdown, select "Disk or ISO image (Please select)."
- Select ISO Image: Click the "SELECT" button and browse to the location where you saved the downloaded ISO image. Select the ISO file.
- Partition Scheme: Rufus will automatically detect the appropriate partition scheme. If you are unsure, leave it at the default setting. Generally, for newer systems, GPT is preferred, while older systems might require MBR.
- File System: Rufus will also automatically select the file system. Leave it at the default setting (usually NTFS or FAT32).
- Start: Click the "START" button. Rufus will warn you that all data on the USB drive will be erased. Confirm to proceed.
- Wait for Completion: Wait for Rufus to complete the process. This may take several minutes.
- Close: Once the process is complete, close Rufus.
Using the Repair Disk
- Boot from the Repair Disk: Insert the created DVD or USB drive into the affected computer. Restart the computer and enter the BIOS/UEFI setup menu. The method for accessing the BIOS/UEFI setup varies depending on the manufacturer, but it usually involves pressing a key like Delete, F2, F12, or Esc during the boot process.
- Change Boot Order: In the BIOS/UEFI setup, change the boot order to prioritize the DVD drive or USB drive. This ensures that the computer boots from the repair disk instead of the hard drive.
- Save and Exit: Save the changes to the boot order and exit the BIOS/UEFI setup. The computer will restart and boot from the repair disk.
- Automatic Uninstallation: The repair disk should automatically begin the process of uninstalling security update KB2823324.
- Restart the Computer: After the uninstallation is complete, the computer will restart automatically.
- Verify Successful Boot: Verify that the computer boots successfully into Windows.
Important Considerations
- Backup Data: Before using the Microsoft Windows Repair Disk for KB2823324 and KB2782476, it’s always recommended to back up any important data, if possible. Although the repair process is designed to be non-destructive, unexpected issues can sometimes occur.
- Correct ISO Image: Ensure that you are using the correct ISO image for your operating system. Using the wrong image could lead to further complications.
- Alternative Solutions: If the repair disk does not resolve the issue, consider exploring other troubleshooting options, such as System Restore or Safe Mode.
- Consult Microsoft Support: If you continue to experience difficulties, contact Microsoft Support for further assistance.
Driver Download Links
Here is the driver download link related to Microsoft Windows Repair Disk for KB2823324 and KB2782476:
Alternative Download Link:
While the primary download location is recommended, here’s an alternative source for the driver (use with caution and verify its authenticity):
Alternative Driver Download Link
Disclaimer: Downloading drivers from unofficial sources can pose security risks. Always verify the authenticity and integrity of the downloaded files before installing them.
This information is provided for informational purposes only and should not be considered professional advice. Always exercise caution when performing system recovery procedures. The Microsoft Windows Repair Disk for KB2823324 and KB2782476 is a tool designed to address a specific issue, and its use should be limited to situations where it is explicitly required.