JetWay HI04-GT Bios A02

This document provides information regarding the JetWay HI04-GT motherboard BIOS update A02. This update addresses specific issues and enhances the overall performance and compatibility of the system. It’s crucial to follow the outlined procedures carefully to ensure a successful and stable BIOS update.

Important Notices Before Proceeding

Before initiating the BIOS update process for the JetWay HI04-GT Bios A02, please take note of the following critical instructions:

1. Post-Flash Procedure: Optimized Defaults or CMOS Clear: After successfully flashing the BIOS, it is mandatory to either load Optimized Defaults within the BIOS setup utility or clear the CMOS (Complementary Metal-Oxide-Semiconductor) memory. This step is crucial for ensuring the system functions correctly and avoids potential instability. Clearing the CMOS will reset the BIOS to its factory settings, resolving any conflicts that might arise from the update.

2. BIOS Upgrade Procedure: The recommended steps for upgrading the BIOS are as follows:

   • Flash BIOS: Initiate the BIOS flashing process using the appropriate utility and the BIOS update file.
   • Enter BIOS: Once the flashing process is complete, restart the system and enter the BIOS setup utility (usually by pressing DEL, F2, or another designated key during startup).
   • Load Optimized Defaults: Within the BIOS setup, locate and select the option to "Load Optimized Defaults." This will configure the BIOS with the optimal settings for system stability and performance.
   • Save and Exit: After loading Optimized Defaults, save the changes and exit the BIOS setup. The system will then restart with the updated BIOS.

3. AWARD Flash Utility Version Requirement: It is imperative to use AWARD Flash Utility version 8.83 or a newer version when upgrading the BIOS for the JetWay HI04-GT Bios A02. Using an older version may lead to incompatibility issues or a failed flash, potentially rendering the motherboard unusable.

4. SPI BIOS Caution: Some motherboards that incorporate SPI (Serial Peripheral Interface) BIOS chips may experience system crashes if updated with older versions of the AWARD Flash Utility. Exercise caution and ensure the correct version of the flash utility is used.

5. AWDFLASH Parameters: When using AWDFLASH (version 8.83 or newer) to update this particular BIOS version, the following parameters are required: "/cd/cp/ch/wb/qi". These parameters are essential for a successful flash.

6. Specific Motherboard Series and Award Flash 8.27B: The following motherboard series should utilize the updated tool Award Flash 8.27B: P4XFA, P4XFB, P4XFBU, P4XFCP, P4XFCU, P4XFM, P4XFMP, P4XFMU, V6DP, V6DU, V6FP, V6FU.

What’s New in the JetWay HI04-GT Bios A02 Update

This BIOS update includes the following key improvements and fixes:

1. USB Storage Device Recognition: This update resolves an issue where some USB storage devices were not being properly recognized by the system. This enhancement improves compatibility with a wider range of USB devices, ensuring seamless data access and transfer.

2. Intel MRC Mold Update: The Intel Memory Reference Code (MRC) mold has been updated in this BIOS version. The MRC is responsible for initializing and configuring the system’s memory. This update likely includes optimizations for memory performance, stability, and compatibility with various memory modules.

3. CPU Overclocking Enhancement: This update aims to improve the overclocking capability of CPUs with an 800MHz Front Side Bus (FSB). Overclocking allows users to run their CPU at a higher clock speed than its default setting, potentially boosting performance. This update likely includes adjustments to voltage and timing parameters to facilitate more stable and reliable overclocking.

4. LAN BootROM Error Message Fix: This update addresses an issue where an incorrect error message would appear on the LAN BootROM (Read-Only Memory) when users repeatedly reset the system while modifying the onboard PCIE (Peripheral Component Interconnect Express) LAN BootROM settings. This fix eliminates the misleading error message and provides a more accurate representation of the system’s status.

Downloading the JetWay HI04-GT Bios A02

You can download the JetWay HI04-GT Bios A02 from the following link:

https://www.techspot.com/drivers/driver/file/information/10965/

Alternative Download Links

While the above link is the primary source, here are some alternative sources where you might find the JetWay HI04-GT Bios A02 update:

1. DriverGuide.com: (Check for Jetway HI04-GT BIOS updates)
2. Softpedia.com: (Search for Jetway HI04-GT BIOS downloads)
3. BIOSAgentPlus: (This tool can identify your BIOS and suggest updates, but use caution and verify the source)
4. Motherboard Manufacturers Website: (Check Jetway’s official website for BIOS updates if available)
5. Archive.org: (Sometimes older BIOS files are archived here)

Disclaimer: Always exercise caution when downloading and flashing BIOS updates. Ensure the file is specifically for your motherboard model and version. Flashing the wrong BIOS can render your motherboard unusable. Always back up your existing BIOS before flashing, if possible. Proceed at your own risk.

This information is intended to provide guidance on updating the BIOS for the JetWay HI04-GT Bios A02. It is recommended to consult the motherboard manual and other reliable sources for detailed instructions and precautions.