Download Epson L5190 Driver Linux – Official Installation Guide

---

Overview of Epson L5190 on Linux

The Epson EcoTank L5190 is a highly efficient multi-function printer designed for small businesses and home offices. While Epson primarily focuses on Windows and macOS, they provide robust support for the epson l5190 driver linux through their specialized download portal. This article guides you through obtaining and installing the necessary drivers for both printing and scanning.

Key Features and Specifications

Before installing the drivers, it is helpful to understand the capabilities of your hardware:

• Ultra-Low-Cost Printing: Refillable ink tanks provide a high page yield.
• High Resolution: Capable of up to 5760 x 1440 dpi printing for sharp text and vivid images.
• Automatic Document Feeder (ADF): Convenient 30-sheet ADF for scanning and copying multi-page documents.
• Flexible Connectivity: Supports USB, Ethernet, and Wireless networking (Wi-Fi Direct).

Step-by-Step Installation Guide

To get your Epson L5190 working on Linux, you need to install two separate packages: the printer driver and the scanner driver.

1. Installing the Printer Driver (ESC/P-R)

Epson uses the ESC/P-R (Epson Standard Code for Printers) language. Follow these steps:

• Go to the official Epson Download Center.
• Search for ‘L5190’ and select ‘Linux’ as the operating system.
• Download the .deb file for Debian/Ubuntu or the .rpm file for Fedora/CentOS.
• Install using the terminal: sudo dpkg -i epson-inkjet-printer-escpr*.deb (Ubuntu) or sudo rpm -i epson-inkjet-printer-escpr*.rpm (Fedora).

2. Installing Epson Scan 2

For scanning functionality, you must install the Epson Scan 2 or Imagescan v3 package:

• Download the bundle containing the install.sh script.
• Extract the archive: tar -xvf epsonscan2-linux-setup.tar.gz.
• Navigate to the folder and run the installer: sudo ./install.sh.

Configuring Your Printer

Once the drivers are installed, you need to register the printer with your system’s print spooler (CUPS):

1. Open your web browser and go to http://localhost:631.
2. Click on ‘Administration’ and then ‘Add Printer’.
3. Select your L5190 from the list of discovered network or local printers.
4. When prompted for a driver, select the ‘EPSON-ESC/P-R Printer Driver for Linux’ model.
5. Click ‘Add Printer’ to finalize the setup.

Troubleshooting Common Issues

If you encounter issues with the epson l5190 driver linux, consider the following:

• Permissions: Ensure your user is part of the lp and scanner groups.
• Wi-Fi Connection: If using a network connection, ensure the printer and PC are on the same subnet. You may need to manually enter the IP address in the Epson Scan 2 configuration utility.
• Dependencies: Some distributions require the lsb package to be installed for the drivers to run correctly.