This article provides information regarding the ASRock 970 Extreme4 CIR (Consumer Infrared) Driver, specifically version 20110219. This driver facilitates the proper functioning of the CIR receiver found on the ASRock 970 Extreme4 motherboard, allowing users to control their system using a compatible infrared remote control. This functionality is particularly useful for home theater PC (HTPC) setups or any situation where remote system control is desired.
Understanding the ASRock 970 Extreme4 and CIR Functionality
The ASRock 970 Extreme4 is a motherboard designed for AMD processors. Among its features is an onboard CIR receiver. This receiver allows the motherboard to communicate with infrared remote controls, enabling users to perform actions such as powering on/off the system, navigating menus, controlling media playback, and adjusting volume, all from a distance.
The CIR driver acts as a translator between the infrared signals received by the hardware and the operating system. Without the correct driver installed, the operating system will not be able to interpret the signals from the remote, rendering the CIR functionality unusable.
Driver Details and Availability
The specific driver discussed here is the ASRock 970 Extreme4 CIR Driver version 20110219. Based on available information, the driver package was last updated on June 10, 2012. The filename associated with this driver is Nuvoton_Win7-64_Win7_Vista64_Vista_XP64_XP(20110219_CIR).zip. This filename suggests compatibility with a range of Windows operating systems, including:
- Windows 7 (32-bit and 64-bit)
- Windows Vista (32-bit and 64-bit)
- Windows XP (32-bit and 64-bit)
Driver Download and Installation
While the direct download link is embedded as follows:
It’s always prudent to exercise caution when downloading drivers from potentially outdated sources. For safety and to ensure the driver’s integrity, consider downloading it from alternative reputable sources, such as driver repositories or ASRock’s official website (although finding a specific older driver version there might be challenging).
Alternative Download Source:
Since the direct download link may not be readily available or the safest option, searching reputable driver download sites with keywords like "ASRock 970 Extreme4 CIR Driver" and "Nuvoton CIR Driver" might lead to alternative download locations. DriverGuide is a potential resource to explore. [This is just an example, please replace with a real and safe link if available: example: https://www.driverguide.com/]
Installation Process
Once you have downloaded the driver package (Nuvoton_Win7-64_Win7_Vista64_Vista_XP64_XP(20110219_CIR).zip), follow these general steps to install the ASRock 970 Extreme4 CIR Driver:
- Extract the Contents: Extract the contents of the ZIP archive to a folder on your hard drive.
- Locate the Setup File: Look for a setup file (e.g., setup.exe, install.exe) within the extracted folder.
- Run the Setup File: Double-click the setup file to begin the installation process.
- Follow On-Screen Instructions: Follow the on-screen prompts to complete the driver installation. You may be required to accept a license agreement, choose an installation directory, and so on.
- Restart Your Computer: After the installation is complete, restart your computer to ensure the driver is properly loaded.
Troubleshooting
If you encounter problems with the ASRock 970 Extreme4 CIR Driver, consider the following troubleshooting steps:
- Verify Compatibility: Ensure that the driver is compatible with your operating system. The driver filename suggests compatibility with a range of Windows versions, but double-check to be sure.
- Check Device Manager: Open the Device Manager in Windows and look for any unrecognized devices or devices with driver errors. If the CIR receiver is listed with an error, try updating the driver manually by browsing to the folder where you extracted the driver files.
- Reinstall the Driver: Try uninstalling the driver and then reinstalling it. This can sometimes resolve installation issues.
- Update Chipset Drivers: Ensure that you have the latest chipset drivers installed for your ASRock 970 Extreme4 motherboard. Chipset drivers provide essential support for various motherboard components, including the CIR receiver.
- Check Remote Control Batteries: Make sure the batteries in your infrared remote control are fresh and properly installed.
- Test with a Compatible Remote: Verify that your infrared remote control is compatible with the CIR receiver on the ASRock 970 Extreme4 motherboard. Some remotes may use proprietary protocols that are not supported.
- Consult ASRock Support: If you have exhausted all other troubleshooting steps, contact ASRock support for further assistance.
Conclusion
The ASRock 970 Extreme4 CIR Driver 20110219 is essential for enabling the consumer infrared (CIR) functionality on the ASRock 970 Extreme4 motherboard. By installing this driver, users can control their system using a compatible infrared remote control, adding convenience and flexibility to their computing experience. While the original driver package may be somewhat dated, this information provides guidance on locating, installing, and troubleshooting the driver to get the CIR functionality working. Remember to prioritize downloading drivers from reputable sources to ensure the safety and stability of your system.