This article provides information regarding the ASRock 970 Extreme3 AppCharger Driver version 1.0.5. This driver is designed to enhance the charging capabilities of USB ports on ASRock 970 Extreme3 motherboards, enabling faster charging of mobile devices like smartphones and tablets. This document will cover the driver’s overview, known details, and where to find it.
Overview of the ASRock 970 Extreme3 AppCharger Driver 1.0.5
The ASRock 970 Extreme3 AppCharger Driver 1.0.5 is a software utility specifically created for the ASRock 970 Extreme3 motherboard. Its primary function is to optimize the power delivery through the USB ports, thereby reducing the charging time for connected devices. Traditional USB ports often provide a limited current output, which can result in slow charging speeds, especially for devices with larger batteries. This driver aims to overcome this limitation by enabling a higher current output, allowing compatible devices to charge significantly faster.
Essentially, the ASRock 970 Extreme3 AppCharger Driver 1.0.5 allows your motherboard’s USB ports to act more like dedicated charging ports, similar to those found on wall chargers or power banks. This is particularly useful for users who frequently rely on their computers to charge their mobile devices.
Key Functionality and Potential Benefits
While detailed feature lists are scarce, the core benefit of the ASRock 970 Extreme3 AppCharger Driver 1.0.5 is faster USB charging. This can translate into significant time savings for users who depend on their computer to charge their smartphones, tablets, and other USB-powered gadgets. This driver likely bypasses the standard USB power limitations, allowing for a higher current flow to connected devices.
The potential benefits extend beyond just speed. Optimized power delivery can also contribute to more stable charging, reducing the risk of interruptions or fluctuations that can sometimes occur with standard USB ports.
Technical Details and File Information
- Driver Name: ASRock 970 Extreme3 AppCharger Driver
- Version: 1.0.5
- Filename: AppCharger(1.0.5).zip
- Last Updated: September 16, 2011 (This indicates the driver is relatively old and might not be fully compatible with the very latest operating systems or devices.)
Download Locations
Given the age of the driver, it’s crucial to ensure you download it from a reputable source to avoid malware or corrupted files. Here are several download links:
-
TechSpot: https://www.techspot.com/drivers/driver/file/information/16182/
-
Softpedia: (Alternative Download Link): https://drivers.softpedia.com/get/MOTHERBOARD/Asrock/Asrock-App-Charger-Driver-1-0-5.shtml
-
DriverGuide: (Alternative Download Link): https://www.driverguide.com/driver/detail.php?driverid=1729582
-
Driver Downloads: (Alternative Download Link): https://www.driversdownloads.com/drivers-download/278966/asrock-app-charger-105
-
Filehorse: (Alternative Download Link): https://www.filehorse.com/download-asrock-app-charger/
Important Considerations Before Downloading and Installing:
-
Compatibility: Verify that the ASRock 970 Extreme3 AppCharger Driver 1.0.5 is compatible with your operating system (Windows XP, Vista, 7, etc.). Check the driver’s documentation or the download site for compatibility information. Because it was released in 2011, it is unlikely to function correctly on Windows 10 or 11.
-
Source Reliability: Download the driver only from reputable sources like the official ASRock website (if available) or well-known driver repositories like TechSpot and Softpedia. Avoid downloading from unknown or suspicious websites.
-
Virus Scan: Before installing the driver, scan the downloaded file with a reputable antivirus program to ensure it is free from malware.
-
Backup: It’s always a good practice to create a system restore point before installing any new drivers. This allows you to easily revert to a previous state if the installation causes problems.
Installation Instructions
While specific installation instructions are not provided with the original driver information, the general process for installing drivers in Windows typically involves the following steps:
- Download the Driver: Download the
AppCharger(1.0.5).zipfile from one of the trusted sources mentioned above. - Extract the Files: Extract the contents of the ZIP file to a folder on your computer.
- Locate the Setup File: Look for a setup file (e.g.,
setup.exeorinstall.exe) within the extracted folder. - Run the Setup File: Double-click the setup file to start the installation process.
- Follow the On-Screen Instructions: Follow the on-screen instructions to complete the installation. You may need to accept a license agreement and choose an installation directory.
- Restart Your Computer: After the installation is complete, restart your computer to ensure the driver is properly loaded.
Alternative Installation Method (If No Setup File Exists):
If there is no setup file, you may need to install the driver manually through the Device Manager:
- Open Device Manager: Press
Windows Key + R, typedevmgmt.msc, and press Enter. - Locate the Device: Find the device you want to update in the Device Manager (it might be listed under "Other devices" or with a yellow exclamation mark).
- Update Driver: Right-click on the device and select "Update driver."
- Browse My Computer: Choose "Browse my computer for drivers."
- Specify Driver Location: Browse to the folder where you extracted the driver files and select the folder.
- Follow the Instructions: Follow the on-screen instructions to complete the installation.
Troubleshooting
If you encounter problems installing or using the ASRock 970 Extreme3 AppCharger Driver 1.0.5, consider the following troubleshooting steps:
- Compatibility Issues: Ensure that the driver is compatible with your operating system. If you are using a newer operating system like Windows 10 or 11, the driver may not function correctly.
- Conflicting Drivers: Check for any conflicting drivers that may be interfering with the installation or operation of the AppCharger driver.
- Driver Conflicts: Uninstall any previous versions of the AppCharger driver before installing the new version.
- System Restore: If you encounter serious problems after installing the driver, try restoring your system to a previous restore point.
- Contact ASRock Support: If you are unable to resolve the issue, contact ASRock support for assistance.
Conclusion
The ASRock 970 Extreme3 AppCharger Driver 1.0.5 is a utility designed to accelerate USB charging on ASRock 970 Extreme3 motherboards. While the driver is relatively old, it may still be useful for users with older systems who want to improve the charging speed of their mobile devices. However, it is crucial to download the driver from a reputable source, verify its compatibility with your operating system, and take appropriate precautions before installing it. Remember to weigh the potential benefits against the risks associated with installing older drivers on newer systems. The ASRock 970 Extreme3 AppCharger Driver 1.0.5 remains a tool aimed at optimizing power delivery for faster device charging on compatible hardware.