AOpen MP57-D Bios R1.08

This article provides information regarding the AOpen MP57-D Bios R1.08, a BIOS update released on September 20, 2010. This update includes several enhancements and bug fixes aimed at improving the stability and functionality of systems utilizing the AOpen MP57-D motherboard. This document will detail the changes incorporated in this version, as well as instructions on how to properly update your BIOS.

Overview

The AOpen MP57-D Bios R1.08 is a crucial update for users of the AOpen MP57-D motherboard. BIOS, or Basic Input/Output System, is a firmware embedded on a small memory chip on the motherboard. It’s the first software that runs when a computer is powered on. It identifies and initializes system hardware components such as the CPU, memory, hard drives, and graphics card, and then loads the operating system. Therefore, a stable and up-to-date BIOS is essential for optimal system performance and compatibility.

What’s New in AOpen MP57-D Bios R1.08

This particular update, AOpen MP57-D Bios R1.08, brings the following improvements:

1. Intel P4500 Processor Support: The most significant enhancement is the addition of support for Intel P4500 series processors. This allows users with these CPUs to utilize their full potential on the AOpen MP57-D motherboard. Without the proper BIOS support, the system may not recognize the processor correctly or may exhibit instability.

2. Renamed "S5 RTC Wake Settings" to "RTC Wakeup from S5 Settings": This is a simple but helpful change that clarifies the purpose of the submenu in the BIOS setup. The S5 state refers to the "soft-off" state of the computer, where it consumes minimal power but can be woken up by an event, such as a scheduled time.

3. Renamed "Wake system with Fixed Time" to "RTC Wakeup from S5": Similar to the previous change, this renaming aims to provide a more accurate and understandable description of the BIOS item. RTC (Real-Time Clock) is used to keep track of the date and time, even when the computer is powered off.

4. Added RTC Function Item Support: This adds more granular control over the RTC functionality within the BIOS. The specific functionalities added aren’t explicitly detailed but likely include options related to time synchronization or power management linked to the RTC.

5. Fixed 64-bit OS Installation Issue with 8GB Memory: A critical bug that prevented users from installing a 64-bit operating system when 8GB of RAM was installed has been resolved. This fix is essential for users who were previously limited to 32-bit OS versions or faced installation errors.

6. Fixed Inability to Get Usage of C3 and C6 States: This addresses a problem where the system was unable to properly utilize the C3 and C6 power-saving states of the CPU. These states allow the CPU to reduce its power consumption when idle, contributing to lower energy bills and reduced heat generation.

7. Added SLP Function Support: SLP (System Licensing Protocol) is a method for activating Windows using a product key stored in the BIOS. This update adds support for SLP, simplifying the activation process for certain Windows installations.

Updating the AOpen MP57-D Bios R1.08

Important: Incorrectly flashing the BIOS can render your motherboard unusable. Ensure you follow these instructions carefully and understand the risks involved before proceeding.

The update package provides two methods for flashing the BIOS: DOS and Windows.

DOS Method:

1. Prepare a bootable DOS USB drive.

2. Copy the flash.bat and IMB18.ROM files to the USB drive.

3. Boot your computer from the USB drive.

4. At the DOS prompt, type the following command and press Enter:

   AFUDOS IMB18.ROM /P /B /N /Reboot

   • AFUDOS is the flashing utility.
   • IMB18.ROM is the BIOS ROM file.
   • /P programs the main BIOS.
   • /B programs the boot block.
   • /N programs the NVRAM.
   • /Reboot automatically reboots the system after the flashing process.

5. The system will reboot automatically after the flashing process is complete.

Windows Method:

1. Close all running applications.
2. Run the winflash.bat file as an administrator. This will likely require right-clicking the file and selecting "Run as administrator".
3. The flashing utility will start.

4. The utility will automatically flash the BIOS with the IMB18.ROM file.

   AFUWIN IMB18.ROM /P /B /N /Reboot

   • AFUWIN is the Windows flashing utility.
   • IMB18.ROM is the BIOS ROM file.
   • /P programs the main BIOS.
   • /B programs the boot block.
   • /N programs the NVRAM.
   • /Reboot automatically reboots the system after the flashing process.
5. The system will reboot automatically after the flashing process is complete.

Verification:

After the update, verify that the BIOS version has been updated correctly. You can do this by entering the BIOS setup utility during system startup (usually by pressing DEL, F2, or F12) and checking the BIOS version displayed on the main screen.

Specifications (Implied)

While the specific specifications aren’t listed in the provided information, we can infer some characteristics based on the supported hardware:

• Motherboard: AOpen MP57-D
• CPU Support: Intel P4500 series processors and potentially other compatible Intel processors.
• Memory Support: Up to 8GB (or more, based on resolved bug) of DDR2 or DDR3 memory (depending on the motherboard design).
• Operating System Support: Windows XP, Windows Vista, Windows 7 (32-bit and 64-bit after the fix).

Related Drivers and Downloads

While the provided text mentions "Related Drivers," it doesn’t provide any specific links. You can typically find drivers for other motherboard components (chipset, audio, network, etc.) on the AOpen website.

Download Link:
You can download the AOpen MP57-D Bios R1.08 update from the following link: https://www.techspot.com/drivers/driver/file/information/14448/

Alternative Download Links:

It’s always a good idea to have alternative download sources in case the primary link is unavailable. Here are a few potential alternatives, though availability is not guaranteed:

1. DriverGuide.com: Search for "AOpen MP57-D BIOS" on DriverGuide to see if they have a copy of the R1.08 BIOS.
2. Softpedia: Check Softpedia’s driver section for AOpen motherboards; they sometimes archive older BIOS versions.
3. DriversCollection.com: This site may have archived drivers and BIOS updates for older hardware.
4. BIOSAgentPlus: While not a direct download site, BIOSAgentPlus can identify your BIOS and potentially link you to a download source.
5. Motherboard Driver Websites: Many websites provide BIOS files and drivers for motherboards. A google search for "download AOpen MP57-D Bios R1.08" will reveal many sites.

Disclaimer: Downloading and flashing a BIOS carries inherent risks. Always verify the file’s integrity and ensure it’s the correct version for your motherboard before proceeding. The alternative links provided are suggestions and may not contain the exact file you’re looking for. Always exercise caution when downloading files from untrusted sources. This AOpen MP57-D Bios R1.08 article should hopefully address your concerns.

Conclusion

The AOpen MP57-D Bios R1.08 update provides essential improvements and bug fixes for users of the AOpen MP57-D motherboard. By adding support for Intel P4500 processors, resolving issues with 64-bit OS installation and memory usage, and improving power management functionality, this update enhances system stability and performance. Remember to follow the update instructions carefully and take necessary precautions to avoid potential problems during the flashing process. Always back up your existing BIOS before flashing a new one. This update for AOpen MP57-D Bios R1.08 can provide many benefits.