This document provides information regarding the JetWay HI04 Bios A02 update, outlining the improvements, fixes, and essential steps for a successful BIOS flashing procedure. This update is crucial for users seeking enhanced system stability, improved device compatibility, and optimized performance.
What’s New in JetWay HI04 Bios A02
The JetWay HI04 Bios A02 update introduces several key improvements and resolves identified issues. These changes aim to provide a more robust and efficient computing experience for users of compatible JetWay motherboards.
-
Enhanced USB Storage Device Recognition: This update addresses a common issue where certain USB storage devices were not properly recognized by the system. This enhancement broadens the compatibility of USB devices, ensuring seamless connectivity and data access. Users experiencing difficulties with USB drive detection should find this update particularly beneficial.
-
Updated Intel MRC Mold: The Intel Memory Reference Code (MRC) mold has been updated in this BIOS version. The MRC is a critical component responsible for initializing and configuring system memory. This update likely incorporates improvements in memory handling, potentially leading to increased stability and performance, especially with different memory modules.
-
Improved Overclocking Capability for FSB 800 CPUs: This JetWay HI04 Bios A02 release focuses on enhancing the overclocking potential of CPUs with an 800MHz Front Side Bus (FSB). Overclocking allows users to push their CPU beyond its stock speed, potentially achieving higher performance. This update likely incorporates adjustments to voltage settings, timing parameters, and other relevant configurations to facilitate stable overclocking for compatible CPUs. However, it is crucial to remember that overclocking can void warranties and potentially damage hardware if not performed correctly. Users should proceed with caution and research proper overclocking techniques before attempting to overclock their systems.
-
LAN BootROM Error Message Fix: The update addresses a problem where an erroneous message would appear on the LAN BootROM when users repeatedly reset the system while modifying the onboard PCIE LAN BootROM. This issue was likely related to improper configuration or conflicts arising from the modifications. The update resolves this error message, ensuring a cleaner and more reliable boot process.
Important Notices Before Upgrading
Before proceeding with the BIOS update, it’s critical to understand and adhere to the following notices. Failure to do so could result in system instability or even permanent damage.
-
Load Optimized Defaults or Clear CMOS After Flashing: After successfully flashing the JetWay HI04 Bios A02, it is imperative to either load Optimized Defaults in the BIOS settings or clear the CMOS (Complementary Metal-Oxide-Semiconductor). This step ensures that the new BIOS settings are properly applied and that the system operates according to the intended configurations. Loading Optimized Defaults will reset the BIOS to a safe and stable configuration, while clearing the CMOS will completely erase the existing BIOS settings, forcing the system to use the default values.
-
BIOS Upgrade Step-by-Step: The recommended procedure for upgrading the BIOS is as follows:
- Flash BIOS: Use the appropriate flashing utility to update the BIOS.
- Enter into BIOS: After the flashing process is complete, restart the computer and enter the BIOS setup utility (usually by pressing DEL, F2, or F12 during startup).
- Load Optimized Defaults: Within the BIOS setup utility, locate the option to Load Optimized Defaults and select it.
- Save and Exit: Save the changes and exit the BIOS setup utility. The system will then restart with the new BIOS settings.
-
AWARD Flash Utility Version Requirement: Ensure that you are using AWARD Flash Utility version 8.83 or a later version before upgrading the BIOS. Using an older version of the utility may lead to compatibility issues or an unsuccessful flash. The correct flash utility is crucial for a smooth and safe BIOS update.
-
SPI BIOS Motherboard Warning: Some motherboards incorporate SPI (Serial Peripheral Interface) BIOS chips. Updating these motherboards with older versions of the AWARD Flash Utility can potentially cause the system to crash. Exercise caution and verify that you are using a compatible version of the flash utility for your specific motherboard model.
-
AWDFLASH Parameters: When using AWDFLASH (ideally a version newer than V8.83) to update this BIOS version, the "/cd/cp/ch/wb/qi" parameters are required. These parameters ensure proper execution of the flash process and prevent potential errors.
-
Specific Motherboard Series and Award Flash 8.27B: The following motherboard series must use the updated tool Award Flash 8.27B for BIOS flashing: (P4XFA P4XFB P4XFBU P4XFCP P4XFCU P4XFM P4XFMP P4XFMU V6DP V6DU V6FP V6FU). Using a different flash utility may result in incompatibility or a failed flash.
Downloading the JetWay HI04 Bios A02
You can download the JetWay HI04 Bios A02 from the following link:
Here are five alternative download links for the JetWay HI04 Bios A02 driver from other sites:
-
Please note that availability of these files on external websites cannot be guaranteed and users should exercise caution when downloading files from untrusted sources.
- DriverGuide (Search for the specific motherboard model and BIOS version)
- Softpedia (Search for the specific motherboard model and BIOS version)
- DriversCollection (Search for the specific motherboard model and BIOS version)
- DriverWhiz (Requires software download, use with caution)
- Archive.org (Search for the specific motherboard model and BIOS version)
Conclusion
The JetWay HI04 Bios A02 update offers valuable improvements and fixes for compatible JetWay motherboards. By addressing USB storage device recognition, updating the Intel MRC mold, enhancing overclocking capabilities for FSB 800 CPUs, and resolving the LAN BootROM error message issue, this update contributes to a more stable, reliable, and efficient computing experience. However, it is crucial to carefully follow the provided instructions and notices to ensure a successful BIOS flashing process and avoid potential complications. Remember to use the correct flash utility version, adhere to the recommended upgrade steps, and load Optimized Defaults or clear CMOS after flashing.