This document provides information regarding the JetWay HA06 motherboard BIOS update, version A10. This update includes critical improvements and new features designed to enhance system stability, compatibility, and performance. It is crucial to read this document carefully before proceeding with the BIOS update to ensure a successful and safe installation.
Key Updates in BIOS A10:
The JetWay HA06 Bios A10 update focuses on three major areas: CPU compatibility, graphics stability during overclocking, and AHCI functionality.
-
CPU Code Update (AGESA 3.1.9.0 to AGESA 3.3.2.0):
This update incorporates the latest AMD Generic Encapsulated Software Architecture (AGESA) code, specifically upgrading from version 3.1.9.0 to 3.3.2.0. The primary benefit of this update is the expanded CPU support for the JetWay HA06 motherboard. Specifically, this BIOS version officially adds support for the AMD Phenom II 920 and Phenom II 940 processors. This means users with these CPUs can now utilize them on their JetWay HA06 motherboards after updating to this BIOS version. The AGESA update also brings with it potential improvements to overall CPU performance and stability.
-
Screen Tearing Fix (Overclocking with Side Port Enabled):
A known issue with previous BIOS versions involved screen tearing when the system was overclocked with the side port (likely referring to a specific display output configuration) enabled. This issue manifested as visual artifacts on the screen, disrupting the user experience. The JetWay HA06 Bios A10 specifically addresses and resolves this problem, providing a stable visual output even when the CPU is overclocked and the side port is in use. This is particularly important for users who overclock their systems for enhanced performance and utilize specific display configurations.
-
AHCI Functionality Bug Fix:
Prior BIOS versions contained a bug that prevented the proper functioning of the Advanced Host Controller Interface (AHCI). AHCI is a crucial interface that enables advanced features for Serial ATA (SATA) hard drives and solid-state drives (SSDs), such as Native Command Queuing (NCQ) and hot-swapping. The JetWay HA06 Bios A10 rectifies this bug, enabling users to fully utilize the benefits of AHCI. This results in improved storage performance, especially with SSDs, and allows for more flexible drive management.
Important Notices and Upgrade Instructions:
Updating the BIOS is a sensitive process, and it is imperative to follow the instructions carefully to avoid potential system instability or damage. The following notices and steps are critical for a successful JetWay HA06 Bios A10 update.
-
Post-Flash Procedure: Load Optimized Defaults or Clear CMOS:
After the BIOS flashing process is complete, it is absolutely essential to either load Optimized Defaults within the BIOS settings or clear the CMOS (Complementary Metal-Oxide-Semiconductor) memory. This step resets the BIOS configuration to its default state, ensuring that the new BIOS settings are properly applied and that the system operates correctly. Failure to perform this step may result in system instability or boot failures.
-
BIOS Upgrade Step-by-Step:
The recommended BIOS upgrade procedure is as follows:
- Flash BIOS: Use the appropriate flashing utility (as detailed below) to update the BIOS.
- Enter into BIOS: After the flash is complete, restart the computer and enter the BIOS setup utility (usually by pressing DEL, F2, or another key during startup).
- Load Optimized Defaults: Within the BIOS setup utility, locate the option to "Load Optimized Defaults" or a similar setting and select it.
- Save and Exit: After loading the defaults, save the changes and exit the BIOS setup utility. The system will then restart with the new BIOS configuration.
-
AWARD Flash Utility Version Requirement:
It is crucial to use the correct AWARD Flash Utility version when upgrading the BIOS. For the JetWay HA06 Bios A10, AWARD Flash Utility version 8.83 or later is required. Using an older version may lead to incomplete or corrupted BIOS flashes, potentially rendering the motherboard unusable.
-
SPI BIOS Warning:
Some motherboards that incorporate Serial Peripheral Interface (SPI) BIOS chips may experience system crashes if updated with older versions of the AWARD Flash Utility. Therefore, ensure you are using the recommended version or a newer one to avoid this potential issue.
-
AWDFLASH Parameters:
When using the AWDFLASH utility (version 8.83 or newer), specific parameters are required to properly renew the BIOS. These parameters are "/cd/cp/ch/wb/qi". These parameters instruct the flashing utility to clear the CMOS, program the flash ROM, check the flash ROM, write the boot block, and perform a quiet update. Omitting these parameters may result in an incomplete or incorrect BIOS update.
-
Motherboard Series and Award Flash 8.27B:
The following motherboard series require the use of the updated Award Flash 8.27B tool for BIOS flashing: P4XFA, P4XFB, P4XFBU, P4XFCP, P4XFCU, P4XFM, P4XFMP, P4XFMU, V6DP, V6DU, V6FP, and V6FU. This is a crucial requirement to ensure compatibility and prevent potential issues during the BIOS update process.
Download Links:
The JetWay HA06 Bios A10 update and related tools can be downloaded from the following locations:
Alternative Download Links:
As BIOS files can sometimes be difficult to find on official manufacturer websites after a period, here are five alternative download links to search for the JetWay HA06 Bios A10. Please use these at your own risk and verify the file’s authenticity before flashing:
- https://www.bios-mods.com/forum/ (Search the forum for HA06 BIOS)
- https://www.elhvb.com/ (A comprehensive archive of BIOS files – search for JetWay HA06)
- https://www.driverscape.com/ (Search for JetWay HA06 BIOS)
- https://www.softpedia.com/ (Search for JetWay HA06 BIOS)
- https://www.driverguide.com/ (Search for JetWay HA06 BIOS)
Disclaimer: Flashing the BIOS is a potentially risky procedure. Incorrectly flashing the BIOS can render your motherboard unusable. Proceed with caution and ensure you understand the instructions thoroughly before proceeding. We are not responsible for any damage that may occur as a result of flashing the BIOS. The JetWay HA06 Bios A10 update can be a valuable upgrade for users of this motherboard, providing enhanced CPU compatibility, improved stability, and bug fixes. By following the instructions and precautions outlined in this document, users can safely and effectively update their BIOS to the latest version. Remember to always back up your existing BIOS before flashing, if possible.