JetWay BI-700 Bios A02

By Posted on

This document provides information regarding the JetWay BI-700 motherboard BIOS update A02. It outlines essential instructions, precautions, and new features implemented in this version. Updating your motherboard’s BIOS can improve system stability, enhance hardware compatibility, and unlock new features. However, it’s crucial to follow the instructions carefully to avoid potential system instability or damage.

Important Notices and Precautions Before Updating

Before proceeding with the JetWay BI-700 Bios A02 update, carefully review the following important notices and precautions. Failure to adhere to these guidelines may result in a non-functional system.

  1. Clear CMOS or Load Optimized Defaults: After successfully flashing the BIOS, it is imperative to either load the "Optimized Defaults" setting within the BIOS menu or clear the CMOS (Complementary Metal-Oxide-Semiconductor) memory. This step ensures that the system correctly recognizes and utilizes the new BIOS settings. Clearing the CMOS can usually be done by removing the CMOS battery from the motherboard for a few minutes while the system is powered off and unplugged. Refer to your motherboard manual for specific instructions on locating the CMOS battery and the proper procedure for clearing CMOS.

  2. BIOS Update Procedure: The recommended BIOS upgrade process is as follows:

    • Flash BIOS: Initiate the BIOS flashing process using the appropriate utility as detailed below.
    • Enter BIOS: After the flashing process completes, restart your computer and enter the BIOS setup utility. This is usually done by pressing a specific key during startup, such as Delete, F2, F12, or Esc. The correct key is usually displayed on the boot screen.
    • Load Optimized Defaults: Within the BIOS setup utility, locate the option to "Load Optimized Defaults" or a similar setting. Select this option to reset the BIOS to its default configuration based on the new BIOS version.
    • Save and Exit: Save the changes you made in the BIOS setup utility and exit. The system will then restart with the updated BIOS configuration.

  3. Flash Utility Requirement: It is essential to use the correct flash utility for the type of BIOS chip on your motherboard. The JetWay BI-700 Bios A02 may require either the AWARD Flash Utility or the AMI Flash Utility. Consult your motherboard manual or the previous BIOS version information to determine which utility is appropriate. Using the incorrect utility can permanently damage the BIOS chip, rendering the motherboard unusable.

  4. Flash Utility Version: Ensure that you are using a compatible version of the flash utility. For the AWARD Flash Utility, version 8.83 or newer is recommended. For the AMI Flash Utility, version 4.29 or newer is recommended. Using older versions of these utilities may not properly flash the BIOS and could lead to errors or corruption.

  5. Command-Line Parameters: When using the AWARD Flash Utility (AWDFLASH), it is necessary to include specific command-line parameters for the flashing process to work correctly. For versions newer than V8.83, use the following parameters: /cd/cp/ch/wb/qi. Similarly, when using the AMI Flash Utility (AMIFLASH) versions newer than V4.29, use the following parameters: /p /b /n /c /k. These parameters instruct the utility on how to properly write the new BIOS image to the chip.

  6. BIOS Type Compatibility: A motherboard with an AWARD BIOS cannot be updated using the AMI BIOS flash utility, and vice versa. It is also critical to use the correct BIOS version for your specific motherboard revision. The A02 version is designed to update A01 BIOS versions, while MA02 is designed to update MA01 versions. Attempting to use an incompatible BIOS version can lead to irreparable damage to the motherboard.

What’s New in JetWay BI-700 Bios A02

The JetWay BI-700 Bios A02 update introduces the following enhancements and improvements:

  1. QPI Item Added: This update adds a QPI (Quick Path Interconnect) item in the BIOS settings. QPI is a high-speed interconnect used by Intel processors to communicate between the processor and the chipset. This addition may allow for finer-grained control over QPI settings, potentially improving system performance and stability.

  2. DDR 1600 Item Added for Lynnfield 8-series CPU: The A02 BIOS version now includes support for DDR3 1600MHz memory when using a Lynnfield 8-series CPU. This allows users to utilize faster memory modules for improved system performance, particularly in memory-intensive applications. Prior BIOS versions may have limited memory speed support, preventing users from taking full advantage of their hardware.

Downloading and Installing the JetWay BI-700 Bios A02

Important: Always back up your existing BIOS before flashing a new version. This allows you to revert to the previous BIOS if the update causes problems. The method for backing up your BIOS will depend on the flash utility you are using. Consult the documentation for your specific flash utility for instructions.

The driver can be downloaded here: https://www.techspot.com/drivers/driver/file/information/12465/

Alternative Download Links:

While the primary download link provides a direct source for the JetWay BI-700 Bios A02, it is always wise to have alternative sources in case the primary link is unavailable or slow. Here are some alternative download links:

  1. Softpedia: (Search "Jetway BI-700 BIOS" on Softpedia) – Softpedia is a reputable software download site that often mirrors driver and BIOS files.

  2. DriverGuide: (Search "Jetway BI-700 BIOS" on DriverGuide) – DriverGuide hosts a vast library of drivers and BIOS updates. Registration may be required.

  3. Archive.org (The Wayback Machine): (Search "Jetway BI-700 BIOS" on Archive.org) – If the original Jetway website is no longer available, Archive.org may have archived versions of the BIOS download page.

  4. DriverEasy: (Search "Jetway BI-700 BIOS" on DriverEasy) – DriverEasy offers driver and BIOS downloads, and may have a copy of the Jetway BI-700 BIOS A02.

  5. Third-Party Driver Sites: Search for "Jetway BI-700 BIOS A02 download" on Google or your preferred search engine. Be cautious when downloading from unknown sources. Only download from reputable websites to avoid malware or corrupted files.

Steps for Updating the BIOS:

  1. Download the BIOS file: Download the JetWay BI-700 Bios A02 file from one of the links above. Ensure that the file is downloaded completely and is not corrupted.

  2. Extract the BIOS file: The downloaded file is typically a compressed archive (e.g., ZIP or RAR). Extract the contents of the archive to a folder on your hard drive. The extracted folder should contain the BIOS image file (usually with a .BIN or .ROM extension) and the flash utility.

  3. Prepare a bootable USB drive (if necessary): Depending on the flash utility and your system configuration, you may need to create a bootable USB drive. This drive will be used to boot your computer into a DOS environment, where you can run the flash utility. Refer to the documentation for your flash utility for instructions on creating a bootable USB drive. Rufus is a popular tool for creating bootable USB drives.

  4. Boot from the USB drive (if necessary): If you created a bootable USB drive, restart your computer and configure it to boot from the USB drive. This is usually done by entering the BIOS setup utility and changing the boot order.

  5. Run the flash utility: Once your computer has booted into the DOS environment (or from within Windows, if the flash utility supports it), navigate to the folder where you extracted the BIOS files and run the flash utility.

  6. Enter the command-line parameters: When prompted, enter the appropriate command-line parameters for the flash utility as described above.

  7. Flash the BIOS: Follow the instructions displayed by the flash utility to flash the BIOS. Do not interrupt the flashing process. Power outages or interruptions during the flashing process can permanently damage the BIOS chip.

  8. Restart your computer: After the flashing process completes, the flash utility will usually prompt you to restart your computer.

  9. Load Optimized Defaults or Clear CMOS: After the system restarts, enter the BIOS setup utility and load the "Optimized Defaults" setting or clear the CMOS.

  10. Verify the BIOS update: After the system restarts again, enter the BIOS setup utility and verify that the BIOS version has been updated to A02.

Disclaimer: Updating the BIOS is a potentially risky procedure. Incorrectly flashing the BIOS can render your motherboard unusable. Proceed with caution and at your own risk. The information provided in this document is for informational purposes only and should not be considered professional advice. Consult your motherboard manual or seek assistance from a qualified technician if you are unsure about any part of the BIOS update process. The JetWay BI-700 Bios A02 can provide the advantages of its new features to your old system.

Related posts:

Leave a Reply

Your email address will not be published. Required fields are marked *