ASRock 970 Extreme3 CIR Receiver Driver 20110219

By Posted on

ASRock 970 Extreme3 CIR Receiver Driver 20110219

This article provides information regarding the ASRock 970 Extreme3 CIR Receiver Driver, version 20110219. This driver is specifically designed for the CIR (Consumer Infrared) receiver integrated within the ASRock 970 Extreme3 motherboard. CIR receivers allow a computer to be controlled remotely using infrared remote controls, a feature particularly useful for media center setups or presentations. This document outlines the driver’s purpose, its specifications, relevant file information, and where to obtain the driver.

Understanding the CIR Receiver

A CIR receiver is a hardware component that interprets infrared signals emitted from a remote control. It acts as an interface between the remote and the computer’s operating system, allowing users to control various functions such as power on/off, volume adjustment, media playback, and navigation. The ASRock 970 Extreme3 motherboard includes this functionality, enabling users to build a more convenient and user-friendly computing experience, especially in home entertainment scenarios.

Driver Details and Specifications

The ASRock 970 Extreme3 CIR Receiver Driver 20110219 is a software component that enables the operating system to communicate with the Nuvoton CIR receiver chip on the ASRock 970 Extreme3 motherboard. Without this driver, the operating system would not be able to recognize and utilize the CIR receiver, rendering the remote control functionality inoperable.

  • Driver Name: ASRock 970 Extreme3 CIR Receiver Driver
  • Version: 20110219
  • Target Device: Nuvoton CIR Receiver
  • Supported Motherboard: ASRock 970 Extreme3
  • Filename: Nuvoton_Win7-64_Win7_Vista64_Vista_XP64_XP(20110219_CIR).zip
  • Last Updated: September 16, 2011 (as per the original posting date)
  • Operating System Compatibility: The filename indicates support for a range of Windows operating systems, including:
    • Windows XP (32-bit and 64-bit)
    • Windows Vista (32-bit and 64-bit)
    • Windows 7 (32-bit and 64-bit)

Driver Installation

The driver is typically distributed as a compressed archive (ZIP file). To install the ASRock 970 Extreme3 CIR Receiver Driver 20110219, follow these general steps:

  1. Download the Driver: Download the "Nuvoton_Win7-64_Win7_Vista64_Vista_XP64_XP(20110219_CIR).zip" file from a reputable source (see download links below).
  2. Extract the Files: Extract the contents of the ZIP file to a folder on your computer.
  3. Locate the Setup File: Within the extracted folder, look for a setup file (e.g., setup.exe or install.exe) or a driver information file (.inf).
  4. Run the Setup: If a setup file exists, double-click it to begin the installation process. Follow the on-screen instructions.
  5. Manual Installation (if no setup file): If there’s no setup file, you’ll need to install the driver manually through Device Manager:
    • Open Device Manager (search for "Device Manager" in the Start menu).
    • Locate the unknown device (usually under "Other devices" or a similar category) that corresponds to the CIR receiver. It may have a yellow question mark icon.
    • Right-click the unknown device and select "Update driver."
    • Choose "Browse my computer for drivers."
    • Browse to the folder where you extracted the driver files.
    • Make sure the "Include subfolders" option is checked.
    • Click "Next." Windows will attempt to install the driver.
  6. Restart Your Computer: After the installation is complete, restart your computer to ensure the driver is loaded correctly.

Downloading the Driver

You can download the ASRock 970 Extreme3 CIR Receiver Driver 20110219 from the following locations:

Important Notes:

  • Always download drivers from trusted sources to avoid malware or corrupted files.
  • Before installing a new driver, it’s recommended to create a system restore point. This allows you to revert to a previous configuration if the driver installation causes problems.
  • If you encounter issues during or after the driver installation, consult the ASRock website or online forums for troubleshooting tips.

Features and What’s New

Unfortunately, the original source material provides very limited information regarding specific features or changes included in the ASRock 970 Extreme3 CIR Receiver Driver 20110219. The original document lacks any listed features or a "What’s New" section. Generally, driver updates may include bug fixes, performance improvements, and enhanced compatibility with newer operating systems or hardware. Given the age of this driver (released in 2011), it’s unlikely to contain features specific to very recent operating system releases.

Troubleshooting

If you are experiencing problems with the CIR receiver on your ASRock 970 Extreme3 motherboard after installing the driver, consider the following troubleshooting steps:

  1. Verify the CIR Receiver is Enabled in BIOS: Some motherboards allow you to enable or disable the CIR receiver in the BIOS settings. Make sure it’s enabled.
  2. Check Device Manager: Ensure that the CIR receiver is properly recognized in Device Manager without any errors (yellow question mark or exclamation point).
  3. Test with a Known Good Remote: Use a remote control that you know is working correctly and is compatible with CIR technology.
  4. Check for Obstructions: Ensure there are no obstructions between the remote control and the CIR receiver on the motherboard.
  5. Reinstall the Driver: Try uninstalling and reinstalling the driver.
  6. Update BIOS: Check for a newer BIOS version for your ASRock 970 Extreme3 motherboard. A BIOS update might include improvements or fixes related to the CIR receiver.
  7. Operating System Compatibility: Confirm the driver is truly compatible with your operating system version. While the filename suggests compatibility, issues can sometimes arise.
  8. Conflict with Other Software: In rare cases, other software installed on your system might interfere with the CIR receiver. Try temporarily disabling recently installed software to see if it resolves the issue.

The Importance of Drivers

Drivers are crucial for the proper functioning of hardware components in a computer system. They act as translators between the operating system and the hardware, enabling them to communicate and work together effectively. Without the correct drivers, hardware devices may not function at all, or may operate with limited functionality. Keeping drivers up-to-date is important for maintaining system stability, performance, and security. However, in some cases, older drivers like the ASRock 970 Extreme3 CIR Receiver Driver 20110219 might be sufficient if they provide the necessary functionality and are compatible with your system.

Conclusion

The ASRock 970 Extreme3 CIR Receiver Driver 20110219 is a specific software component designed to enable the CIR receiver functionality on the ASRock 970 Extreme3 motherboard. While information about specific features and improvements in this version is limited, this article provides a comprehensive overview of the driver, its purpose, installation instructions, and troubleshooting tips. By following the guidelines provided, users can successfully install and utilize the ASRock 970 Extreme3 CIR Receiver Driver 20110219 to control their computers remotely with compatible infrared remote controls. Remember to always download drivers from trusted sources and to create a system restore point before installation.

Related posts:

Leave a Reply

Your email address will not be published. Required fields are marked *